Device Operation - Grundig FineArts 32 FLE 9130 SL Instruction Manual

operAtion­usinG­externAl­DeviCes
Device­operation
You can decide whether external devices should
react to your television's remote control.
1 Press »
«, use »
select the preset »HDMI1« to »HDMI4« and
press »oK« to confirm.
2 Open the menu with »menu«.
3 Select the menu item »SOURCE SETUP« with
» « or » « and press »oK« to confirm.
v Λ
– T he »SOURCE SETUP« menu appears.
SOURCE SETUP
Source
DIGILINK
Device Selection
Remote Control
Device Standby
Exit
Back
4 Select the line »Remote Control« with »
or » «.
Λ
5­
Select the type of operation (»RC Pass-
through«, »Deck« or »Tuner« with »
>
» «.
notes:
»RC Passthrough« can be used for all d evices.
7
»Deck« and »Tuner« can be selected in ac-
cordance with the external device which
has been connected.
Try out which type of remote control opera-
7
tion the external device reacts to the best.
Read about the scope of functions of the
7
DIGILINK-compatible device in the respec-
tive operating manual.
6 Press »menu« to end the setting.
­ 5 8
ENGLISH
< >
«, » «, » « or » « to
v Λ
20.09.2010
15:46
HDMI1
GRUNDIG DVD
RC Passthrough
<
« or
switching­the­device­to­standby
This option switches the external device to
standby.
1 Press »
select the preset »HDMI1« to »HDMI4« and
press »oK« to confirm.
2 Open the menu with »menu«.
3 Select the menu item »SOURCE SETUP« with
» « or »
v Λ
– T he »SOURCE SETUP« menu appears.
4 Select »Device Standby« with »
and press »oK« to confirm.
– The external device switches itself off.
«
v
­-----------------------------
<
«, use » «, » «, »
v Λ
« and press »oK« to confirm.
v
>
« or » « to
« or » «
Λ