Grundig FineArts 32 FLE 9130 SL Instruction Manual page 29

smArt­inter@Ctive­tv­AnD­Home­networK
wired­network­settings
There are two ways of making the wired network
settings.
A Automatic wired network connection,
a ll connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) are ob-
tained from modem automatically.
B Manual wired network connection,
a ll connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automatic­wired­network­­
connection
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. A Television
connected to the same network with a Modem
or IP sharer that support DHCP obtains the
»DNS« values that are required for »IP Address«,
»Netmask«, »Gateway« and internet access
automatically, and thus you are not required to
enter those values manually.
1 Open the menu with »menu«.
2 Select the line »INTER@CTIVE TV« with »
or » « and press »oK« to confirm.
Λ
– T he »INTER@CTIVE TV« menu appears.
INTER@CTIVE TV
inter@ctive Applications
Network Settings
Connection Type
Network Configuration
IP Address
DNS
Netmask
Gateway
MAC Address
Exit
Back
«
v
dd.mm.yyyy
hh:mm
OK
Wired
AUTO
10.134.151.15
10.134.150.8
255.255.255.0
10.134.151.254
E1:DF:BF:92:00:11
Connect
Test Connection
3 Select »Connection Type« with »
and then select »Wired« with »
4 Select »Network Configuration« with »
» « and then select »AUTO« with »
Λ
5 Start the registration to the home network by
pressing » « (red).

– T he mesage »Connecting ... Please Wait«
appears.
6 Press » « (green) to make sure that the

network connection is established with the
current settings.
– T he messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
7 Press »menu« to end the setting.
note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
­
« or » «
v Λ
< >
« or » «.
« or
v
< >
« or » «.
­ 2 9
ENGLISH