NETGEAR WNR500 User Manual page 74

3. Select Wireless Repeating Function under Advanced in the main menu. The Wireless
Repeater screen displays. Select the Enable Wireless Repeating Function check box and
select the Wireless Basic Station radio button.
Figure 4-10
The available settings in this screen are:
• Disable Wireless Clients Association. If checked, the wireless basic station does not transmit
any signals to clients that are directly connected to it.
• Repeater IP Address: Set the repeater's IP address to an IP address that is different from the
Wireless basic station and other repeaters to avoid IP address conflict. NETGEAR
recommends that you set the Ip addresses of the same network segment for the wireless
basic station and repeaters.
• Repeater MAC Address 1/2/3/4. Enter the MAC address of the router that works as the
repeater for the wireless basic station.
Note: A wireless basic station can be configured with up to four repeaters.
4. Click Apply to save your settings.
Customizing Your Network Settings
N-150 2-Port Wireless Router WNR500 User Manual
v1.0, November 2011
4-16