NETGEAR WNR500 User Manual page 69

1. Select Static Routes under Advanced in the main menu. The Static Routes screen displays.
Figure 4-5
2. Click Add to expand the Static Routes screen.
Figure 4-6
3. In the Route Name field, enter a name for this static route. (This is for identification purposes
only.)
4. Select the Private check box if you want to limit access to the LAN only. If Private is selected,
the static route is not reported in RIP.
5. Select the Active check box to make this route effective.
6. In the Destination IP Address field, enter the IP address of the final destination.
7. In the IP Subnet Mask field, enter the IP subnet mask for this destination.
If the destination is a single host, enter 255.255.255.255.
8. In the Gateway IP Address field, enter the gateway IP address, which must be a router on the
same LAN segment as the WNR500 router.
Customizing Your Network Settings
N-150 2-Port Wireless Router WNR500 User Manual
v1.0, November 2011
4-11