NETGEAR WNR500 User Manual page 32

2. Select Wireless Settings under Setup in the main menu. The Wireless Settings screen
displays.
Figure 2-2
The available settings in this screen are:
• Enable SSID Broadcast. If checked, the SSID will be broadcast in this channel.
• Enable Wireless Isolation. If checked, the wireless client under SSID can only access the
Internet, and cannot access other wireless clients, including clients under the same SSID,
Ethernet clients, or clients associated with this device.
• Name (SSID). The SSID is also known as the wireless network name. Enter a value of up to
32 alphanumeric characters. When more than one wireless network is active, different wireless
network names provide a way to separate the traffic. For a wireless device to participate in a
particular wireless network, it must be configured with the SSID for that network. The
WNR500 default SSID is NETGEAR. You can disable this broadcast as described in
"Viewing Advanced Wireless Settings" on page
Safeguarding Your Network
N-150 2-Port Wireless Router WNR500 User Manual
2-12.
v1.0, November 2011
2-7