Table of Contents
Advertisement
INSTALLATION
HVAC System Setup
The thermostat requires that you setup the type and configuration of your HVAC system for
proper operation. This is done in the Thermostat Info screen Setup button or the Installer
Settings screen on the thermostat. The Installer Settings is a hidden screen. To access it,
press the main menu button and when the main menu screen appears, press and hold the
middle two buttons for 5 seconds.
Thermostat Main Menu
Press and hold two middle buttons to enter the Installer Settings screen
Installer Settings screen
Installer Settings
Before operating the system, you must configure the thermostat for the correct HVAC
system type. You will need to know the following information to correctly configure the
thermostat. The HVAC setup is in the Mechanical Settings menu screen.
HVAC system type: What type HVAC system do you have? Standard or Heat pump
For Standard systems: Fan Type: Do you have Gas heat or Electric heat?
For Heat Pump systems: Change over valve (or reversing valve) type: Does your system
change over with cooling operation or with heating operation? Check your existing
DCN: 140-01773-01
Menu Selection
User Settings
75
Away Setpoints
ZWave Install
Thermostat Info
Done
Select
Installer Settings
Display Lock
N
75
Service Mode
System Settings
Max Heat SP
90
_
+
Done
Select
Page 2
Advertisement
Table of Contents
