Connecting The Ac Power Supply Cord And Other Information - Technics SA-DX1050 Operating Instructions Manual

Connecting the AC power supply cord and other information

SA-DX1050 only
Cooling fan
The cooling fan operates at
high power output levels only.
Note
The included AC power supply cord
is for use with this unit only. Do not
use it with other equipment.
FRONT
R A L
+
–
ERS
PARLEURS
SURROUND CENTER FRONT
R L R B L
+
–
AC power supply cord
(included)
Connect this cord after
all other cables and
cords are connected.
AC IN AC OUTLET
Household AC outlet
(AC 120 V/60 Hz)
Conserving power
The unit consumes 1 W even when it is turned off with [POWER, ^/l].
To save power when the unit is not to be used for a long time, unplug it
from the household AC outlet.
If the unit is left unplugged for longer than a few weeks, all settings will
revert to the factory settings. Do the settings again if this occurs.
"SWITCHED" AC outlet
Power to the outlet is controlled by
the power switch of this unit. Audio
equipment rated up to a maximum of
80 W can be connected here. If
equipment exceeding this rating is
connected, the outlet may be
rendered inoperable. Consult your
dealer to replace the fuse.
9
RQT5730