Basic Operations; Turning On The Power - JVC LVT1003-001B Instruction Manual

1

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 9 – 11.
To play a CD and Video CD (VCD),
see pages 12 –16.
To play an MP3 disc,
see pages 17 – 21.
• Turn on the monitor and select the
appropriate monitor input before playing
a VCD.
3
Adjust the volume.
Volume (or audio) level indicator
3
To increase the volume
To decrease the volume
(see page 24)
Volume level appears.

BASIC OPERATIONS

4
Adjust the sound as you want. (See
pages 22 and 23.)
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold
second.
"SEE YOU" appears, then the unit turns off.
• If you turn off the power while listening to a
disc, next time you turn on the power, disc play
will start from where playback has been
stopped previously (from the beginning of the
file in the case of an MP3 disc).
PBC playback of a VCD will not be resumed.
See page 15 for details.
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.
2
for more than one
7