Playing An Mp3 Disc - JVC LVT1003-001B Instruction Manual

Playing an MP3 disc

Insert an MP3 disc into the loading slot.
The CD–in indicator flashes.
The CD–in indicator lights up.
Total folder number Total file number
Ex.: When the disc contains 19 folders and
144 MP3 files
All files will be played repeatedly until you stop
playback.
Notes:
• When a disc is already in the loading slot, pressing
CD turns on the unit and starts playback
automatically.
• MP3 discs require a longer readout time.
• When playback starts, disc information will
automatically appear. (See also the next column.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select "CD" as the source, disc play
starts from the beginning of the file which was
playing previously.
To stop playback temporarily
Press 6.
Playback pauses and "PAUSE" flashes on the
display.
To resume playback, press 6 again.
The unit turns on, draws
the MP3 disc and starts
playback automatically.
MP3 indicator lights up.
To stop play and eject the disc
Press 0.
Playback stops and the disc automatically ejects
from the loading slot.
To change the display information
While playing back an MP3 file,
you can change the disc
information shown on the display.
Each time you press DISP
(display), the display changes to
show the following:
Folder name
File name
Elapsed playing time and
Current file number
Clock and
Current file number
Note:
The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also "To select the scroll mode—SCROLL" on
page 24.
To check the information of an MP3 disc
on the monitor
Turn on the monitor while playing back an
MP3 disc.
The information appears automatically as
follows:
Current file
• This unit can show a maximum of 239 files.
Current folder name
19