Feeding Problems (stalled envelopes) (cont'd)
To clear a stalled envelope in the feeder area (DM400c):
1. Open the feeder cover and lift the feeder clearance lever two
clicks to the fully upright postion remove mail under the feeder
rollers.
Feeder
Cover
2. If necessary to gain access to the material, remove the moistener
assembly.
IMPORTANT:
Do not remove mail without lifting the clearance lever.
3. Reinstall moistener, lower clearance lever and close the feeder
cover.
SV62261 Rev. C
Lift the blue feeder
clearance lever
2
Moistener
Assembly
1
1
13 • Troubleshooting
90°
13-5