Maintaining the Moistener (cont'd)
Cleaning the Stripper Blade/Brush Assembly (DM475)
4. Clean the moistener brush by running the it under plain water.
Blot the excess water from the brush after rinsing it.
Replace the assembly if it cannot be cleaned thoroughly.
NOTE:
i
5. If you need to clean the wick and shield, continue with Cleaning
the Shield and Wick on the next page.
6. Slide the assembly back onto the machine. You should hear a
click as it engages.
7. Lower the moistener clearance lever and close feeder/WOW
cover.
SV62261 Rev. C
Stripper Blade and Brush
12 • Maintenance
12-17