Chapter 3 Service Aids; Recommended Test Tools - Motorola Radius CM200 Service Manual

1.0

Recommended Test Tools

Table 3-1 lists the service aids recommended for working on the radio. While all of these items are
available from Motorola, most are standard workshop equipment items, and any equivalent item
capable of the same performance may be substituted for the item listed.
Motorola Part
No.
RLN4460_
RVN4191_
RKN4081_
FKN8096_
RKN4083_
FKN8113_
GTF374_
RLN4008_
HSN9412_
HLN8027_
8180384N64
3080369B71
3080369B72
6686119B01
6680334F39
Table 3-1 Service Aids
Description
Portable Test Set
Customer Programming
Software (CPS) – Software on
CDROM & Global Tuner
Programming Cable with
Internal RIB
Data/Flash Adapter Key
Mobile Programming/Test Cable Connects radio to RIB (RLN4008_).via rear
Adapter Cable
Program Cable
Radio Interface Box
Wall-Mount Power Suppy
Mini UHF to BNC Adaptor
Housing Eliminator (25W)
Computer Interface Cable
Computer Interface Cable
Removal Tool
Hex Tool
Application
Enables connection to audio/accessory jack.
Allows switching for radio testing.
Programs customer options and channel data.
Includes radio interface box (RIB) capability.
Used with RKN4081 (10 to 8 pin adapter for
front Telco connector with Data/Flash switch).
accessory connector
Used with RKN4083 (20 to 16 pin adapter for
rear accessory connector).
Connects RIB to Radio microphone input.
Enables communications between radio and
computer's serial communications adapter.
Used to power the RIB. (120 V ac)
Adapts radio antenna port to BNC cabling of
test equipment.
Test Fixture used to bench test the radio pcb.
Connects the RIB to the Computer (25-pin).
Connects the RIB to the Computer (9-pin)
(Use for IBM PC AT – other IBM models use
the B71 cable above).
Assists in the removal of radio control head.
Assists in the removal of antenna connector.
Chapter 3
SERVICE AIDS