Axis Camera Station User Manual page 19

In Playback mode you can use digital zoom by clicking in the image and scrolling in and out by scrolling with your mouse
wheel. You can also click and draw a rectangle to magnify a selected part of the image, see Area zoom, on page 15. A
navigation box appears in the lower right-hand corner to use to navigate around the image. If audio was included in the
recording a volume control appears in the playback image.
Smart search Snapshot
Audio control
Playback toolbar
During playback the following toolbar buttons become active:
To recording search - Click this button to return to the recording search results.
Smart search
With Smart search you can search for motion in a specific area in recordings. This is especially useful when searching
continuous recordings.
Click the Smart search button in the toolbar, a Smart search next button will appear in the playback panel, a motion window
will appear in the image and a sensitivity slider will appear in the lower right-hand corner
1. Drag and size the motion window to the desired area of the image.
2. Adjust slider to the proper sensitivity. A high value indicates high sensitivity to motion.
3. Click the Smart search next button to jump to the place in the recording where motion takes place.
Snapshot - Opens a dialog to take a snapshot image of the selected camera and save the selected snapshot as a jpg
image to file.
Zoom in
Zoom out
Show bookmarks
19
AXIS Camera Station - Workspaces
Navigation box