Alarm and Task Tabs
At the bottom of the live view, recordings and camera management workspaces, are the Alarm and Task tabs.
The Alarm tab
The Alarm tab lists:
Time - The time the alarm was triggered or took place according to a schedule
Alarm - What kind of alarm was triggered
Description - A brief description of the alarm
Alarm Procedure - Lists if there is a procedure configured to take place if an alarm is triggered
Recording - Shows if the alarm contains a recording
When an alarm occurs, the user can go to the alarm list and either right-click on an alarm or use the toolbar to the right and
select:
Go to Recordings - Start a playback of the event that triggered the alarm.
Show Alarm Procedure - Display instructions for the AXIS Camera Station user.
Acknowledge Alarm - Recognize the alarm.
Remove Alarm Entry - (Live logs only.) Delete the alarm entry from the list.
To set up alarms see Raise alarm action, on page 44.
The Task tab
Task - The name of the task
Status - Shows if the task is:
• Waiting (Waiting for another task to be completed on the server)
• Running (Performing the task)
• Cancel pending (Clean up after the task when the user pressed cancel)
• Canceled (Cleaning is complete and the task is canceled)
• Finished (Task completed)
• Error (Task completed with errors i.e.,the task failed on one or more of the selected cameras)
• Start Time - When the task was started
• Owner - Who initiated the task
• Progress - Shows how much of the task is left to be completed.
AXIS Camera Station - Introduction
10