Location Of The Buttons; Front Panel - JVC KS-LX200R Instructions Manual

Front panel

Cassette compartment
1
Control panel*
3
1 +/– button
¢ / 4
2
button
¢ / 4
•
CLOSE button.
3 SEL (select) button
4 SCM (sound control memory) button
5 MO/
(mono/Dolby) button
6 LOCAL button
7 MODE ATT (attenuator) button
• Also functions as SSM buttons when pressed
together with the DISP button.
To activate the display demonstration
While holding DISP, press
Various functions and display illumination modes equipped with this unit will be demonstrated repeatedly
in sequence. During the display demonstration, "DEMO" flashes on the display.
To turn off the display demonstration, press
• The display demonstration will turn off automatically after 1 hour.
How to use the number buttons:
After pressing MODE ATT, the number buttons work as different function buttons (while "MODE"
remains on the display.)
To use these buttons as number buttons after pressing MODE ATT, wait for 5 seconds without
pressing any number button so that
"MODE" disappears from the display.
• Pressing MODE ATT again also
erases "MODE" from the display.

LOCATION OF THE BUTTONS

4 5 6 7 8
also functions as ON or
¢ until "DEMO" appears on the display.
w e r
9 p q
*The control panel slides out when you press ON/CLOSE .
8 DISP (display) button
• Also functions as SSM buttons when pressed
together with the MODE ATT button.
9 SOURCE button
• Also functions as BAND or 23.
p TP (traffic programme)
RDS (radio data system) button
q PTY (programme type) button
w INT (intro) button
e RPT (repeat) button
r RND (random) button
t 0 (eject) OFF button
y Number buttons
¢ again for a few seconds while holding DISP.
Display window
2
y
0
t
3