Finding The Beginning Of A Tune - JVC KS-FX701 Instructions Manual

To fast-forward and rewind a tape
• Press ¢
tape.
When the tape reaches its end, the tape is reversed and
playback starts from the beginning of the other side.
• Press 4
for more than 1 second to rewind the tape.
When the tape reaches its end, playback of the same side
starts.
To stop fast-forward and rewind at any position on the tape, press TAPE 2 3.
Tape play starts from that position on the tape.

Finding the beginning of a tune

Multi Music Scan allows you to automatically start playback from the beginning of a specified
tune. You can specify up to 9 tunes ahead or before the current tune.
During playback
When the beginning of the specified tune is located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback starts from the beginning of that side.
– If the tape is fast forwarded to the end, it is reversed and played from the beginning of the other
side.
• In the following cases, the Multi Music Scan function may not operate correctly.
– Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions
during tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between tunes.
10
for more than 1 second to fast-forward the
To locate a tune
ahead of the current
tune on the tape
To locate a tune
before the current
tune on the tape
Specify how many tunes ahead or
before the current tune the tune you
want is located.
Each time you set the tune, the number changes
up to ±9.
Tape direction
¢
4