Getting Started Guide - Accu-Chek Multiclix - Accu-Chek Performa Getting Started Manual

Getting Started Guide - Accu-Chek
Load drum
A B
A Remove cap. B Insert new drum with blue ring end first.
Snap drum into place. Replace cap.
Exchange drum
C D
C When number 1 appears in the display, D Remove used drum.
(It cannot be reinserted.)
last lancet is in use. Dispose of drum with household waste.
A B
Remove cap. Load new drum.
26
Multiclix
®
Set penetration depth
Turn dial to select depth setting.
For beginners, select a lower setting.
(Start with level 1.)
You're ready to test:
Press, click, and twist.
Getting Started Guide - Accu-Chek
3 simple steps to teach and learn
Step 1A Press 1B
1A 1B
Press priming button down like a The transparent release button turns
ballpoint pen. yellow.
Step 3A Twist 3B
3A 3B
To change lancet, turn priming button The numbers on the display show how
as far as it will go, and turn back again. many lancets are left.
Multiclix
®
Step 2 Click
2 Press lancing device firmly against side
of fingertip and press release button.
For more information,
please visit www.accu-chek.com.au
27