Master Cylinder Remounting - Suzuki SV1000 Service Manual

8 SV1000K3
• Install the left handlebar switch to the handlebars by engaging
the stopper 5 with the handlebar hole 6.
• Install the clutch master cylinder. (#SV1000S 6-94 and
below)
• Install the handlebar balancers and rear view mirrors.
(Handlebar balancer installation: #16)

MASTER CYLINDER REMOUNTING

FRONT BRAKE
• When remounting the brake master cylinder onto the handle-
bars, align the master cylinder holder's mating surface A with
punch mark B on the handlebars and tighten the upper clamp
bolt first as shown.
" Front brake master cylinder mounting bolt:
CLUTCH
• When remounting the clutch master cylinder on the handle-
bars, align the master cylinder holder's mating surface A with
punched mark B on the handlebars and tighten the upper
clamp bolt first.
" Clutch master cylinder mounting bolt:
10 N·m (1.0 kgf-m, 7.0 lb-ft)
10 N·m (1.0 kgf-m, 7.0 lb-ft)
Master
cylinder
Master
cylinder
holder
Handlebars
"UP" mark
Master
cylinder
holder
Handlebars
"UP" mark
Master
cylinder