GE Profile PVM1790SRSS Installation And Owner's Manual page 221

English
screw holes
Reinstallation:
1. Remove the lower pivot pin from the lower hinge by turning counter
clockwise. Move the pin to the opposite hole and tighten. (see below)
fig. # 3
bottom of unit
bottom hinge
2. Tilt refrigerator on a 45-degree angle to have access to the
bottom front.
CAUTION: Two People Required.
7
central hinge
(see fig. # 3 and fig. # 4)
doorstopper (right side)
middle pivot pin
lower pivot pin
fig. # 2