JVC KD-SH9700 Instructions Manual page 67

Notice the following information will help you to solve your problems.
Keep this IMPORTANT sheet together with the INSTRUCTIONS.
• After installing the unit
= Follow the procedure Å described below.
• If the unit does not operate
= Follow the procedure Å described below.
• If a disc is not ejected from the loading slot
= Follow the procedure ı described below. (If the procedure ı does not work, try the
procedure Å.)
• If a disc is not recognized (
on the display) even though there is a disc in the loading slot
= Follow the procedure ı described below. (If the procedure ı does not work, try the
procedure Å.)
Å To reset the microcomputer
Press the reset button on the control panel using a ball-point pen or similar tool.
This will reset the built-in microcomputer.
NOTE: Your preset adjustments—such as preset channels or sound adjustments—will also be
erased.
ı To eject a disc by force
While holding
(Be careful not to drop the disc when it is ejected.)
button
IMPORTANT
"No Disc," "Loading Error," or "Eject Error"
, press and hold 0 for more than 2 seconds.
flashes
Reset button
0 (eject) button
LVT1043-001A
[J/C]