Set Supervisor/User Password - Tangent Vita 8000S User Manual

VITA 8000S
Set Supervisor / User Password
When you select this function, a message as below will appear on the screen:
Type the password, up to 8 characters in length, and press <Enter>. The password
typed now will replace any previously set password from CMOS memory. You will be
prompted to confi rm the password. Retype the password and press <Enter>. You may
also press <Esc> to abort the selection and not enter a password.
To clear a set password, just press <Enter> when you are prompted to enter the password.
A message will show up confi rming the password will be disabled. Once the password is
disabled, the system will boot and you can enter Setup without entering any password.
When a password has been set, you will be prompted to enter it every time you
try to enter Setup. This prevents an unauthorized person from changing any part of your
system confi guration.
Important
About Supervisor Password & User Password:
Supervisor password can enter and change the settings of the setup menu.
User password can only enter but do not have the right to change the settings
of the setup menu.
3-22