Table of Contents
Advertisement
support S3 mode, system will enter S1 mode instead of
S3 mode.
PWRON After PWR-fail
This item specifi es whether your system will reboot after a power failure or interrupt oc-
curs. Available settings are:
[Off]
Leaves the computer in the power off state.
[On]
Leaves the computer in the power on state.
[Former-sts]
Restores the system to the status before power failure
or interrupt occurred.
Wake Up Event Setup
Press <Enter> and the following sub-menu appears.
Wake-Up by PCI card
When setting to [Enabled], the feature allows your system to be awakened by
PCI card.
USB KB Wake-Up from S3
This setting allows you to enter "Any Key" (max. 8 numbers) to wake up the system
from S3 state. S
Resume By Alarm
The fi eld is used to enable or disable the feature of booting up the system on a
scheduled time/date.
Date
The fi eld specifi es the date for Resume By RTC Alarm. Settings: [0]~[31].
HH:MM:SS
The field specifies the time for Resume By RTC Alarm. Format is
<hour><minute><second>.
BIOS Setup
3-17
Hide quick links:
Advertisement
Table of Contents
