Belkin Wireless G Desktop User Manual page 29

Using the Belkin Wireless Utility
Connecting your Computer to a Wireless Router (or Access Point)
that Requires WPA (with Radius Server), 802.1x, or Cisco LEAP
1.
Double-click the Signal Indicator icon
"Belkin Wireless Utility" screen.
2.
Under the "Security" tab, click "Enable WPA Encryption".
3
. Select "WPA", "802.1x", or "Cisco-LEAP" from the "Security
Type" drop-down box.
4.
Under "EAP Selection", select the settings to connect to your
router or as indicated by your network administrator.
5.
Click "OK" to save the settings.
to bring up the
27 27
1
2
3
4
5
6