Belkin Wireless G Desktop User Manual page 24

Using the Belkin Wireless Utility
WPA-PSK (no server)
Choose this setting if your network does not use a radius server. WPA-PSK
(no server) is typically used in home and small office networking.
1.
From the Security Mode drop-down menu, select "WPA-PSK
(no server)".
2.
Enter your network key. This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must be
used on all of the clients (network cards) that you want to include
in your wireless network.
3.
Click "Apply Changes" to finish. You must now set all clients
(network cards) to match these settings.
22 22