Connect A Computer; Open A Browser - NETGEAR N900 Installation Manual

4. Connect a computer.

Router
You can use an Ethernet cable (not included) or connect
wirelessly.
• Use the Ethernet cable to connect your computer to an
Ethernet port on your router.
• Or connect wirelessly by using the preset wireless security
settings on the label on the product label.

5. Open a browser.

NETGEAR genie displays and guides you through the
installation.
If genie does not display, close and reopen the browser and type
http://www.routerlogin.net in the address bar, or see
Troubleshooting
4
5
on page 13.
7