JVC KD-HDR1 Instructions Manual page 30

Symptoms
• "CH---" appears on the display for
about 2 seconds, then returns to the
previous channel while listening to
the XM Satellite radio.
• "OFF AIR" appears on the display
while listening to the XM Satellite
radio.
• "LOADING" appears on the display
while listening to the XM Satellite radio.
• "RESET 8" appears on the display.
• Satellite radio does not work at all.
• The iPod or D. player does not turn
on or does not work.
• Buttons do not work as intended.
• The sound is distorted.
• "NO IPOD" or "NO DP" appears on
the display.
• Playback stops.
• No sound can be heard when
connecting an iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the display
when connecting a D. player.
• "NO FILES" or "NO TRACK"
appears on the display.
• "RESET 1" – "RESET 7" appears on
the display.
• "RESET 8" appears on the display.
• The iPod's or D. player's controls do
not work after disconnecting from
this unit.
30
Remedies/Causes
Selected channel is no longer available or is
unauthorized.
Select another channel or continue listening to the
previous channel.
Selected channel is not broadcasting at this time.
Select another channel or continue listening to the
previous channel.
The unit is loading the channel information and
audio. Text information are temporarily unavailable.
Reconnect this unit and the satellite radio
correctly, then reset the unit.
• Check the connecting cable and its connection.
• Update the firmware version.
• Change the battery.
The functions of the buttons have been changed.
Press MODE before performing the operation.
Deactivate the equalizer either on the unit or the
iPod/D. player.
Check the connecting cable and its connection.
The headphones are disconnected during
playback. Restart the playback operation using the
control panel (see page 22).
Disconnect the headphones from the iPod nano.
Disconnect the adapter from the D. player. Then,
connect it again.
No tracks are stored. Import tracks to the iPod or
D. player.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
Check the connection between the adapter and
this unit.
Reset the iPod or D. player.