Panasonic Viera TH-L47DT50A Operating Instructions Manual page 9

■
Assembling the pedestal
Attach the bracket to the tabs of the top of the base
assembly screws
●
Forcing the assembly screws the wrong way will strip the threads.
●
Hold the bracket not to fall over.
■
Securing the TV
1
Attach the pedestal
2
Attach the cover
Attach the cover and fix securely with assembly screws
C
■
Moving the TV
Hold the specified parts as shown to stand the TV up and move it with two people.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Put the TV onto a work table with the screen panel down on the clean and soft cloth.
2 Remove the assembly screws
3 Remove the assembly screws
4 Remove the pedestal from the TV.
5 Remove the assembly screws
tabs
B
E
from the cover.
from the TV.
from the bracket.
and fix with
Front
Align the 3 tabs on the bracket with the
grooves on the back of the TV and insert
them.
Make sure the centre tab is in the hole
of the TV. Slide in the bracket aligning
the arrow marks (↓↑) on the TV and the
bracket.
Tighten the 4 assembly screws
at first, then tighten them firmly to fix
securely.
.
A
Tabs (top)
D
F
loosely
9