Indicator / Control panel
2
8
1
3
1
Remote control signal receiver
●
Do not place any objects between the TV remote
control signal receiver and remote control.
2
C.A.T.S. (Contrast Automatic Tracking System)
sensor
●
Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
(p. 43)
3
Power and Timer LED
Red: Standby
Green: On
Orange: Timer Programming On
Orange (flash):
Recording of Timer Programming in
•
progress
One Touch Recording in progress
•
Red with orange flash:
Standby with Timer Programming On
•
Standby with One Touch Recording
•
●
The LED blinks when the TV receives a command
from the remote control.
12
Rear side of the TV
/
/
/
4
5
1
2 3
6
7
4
Function select
●
[Volume] / [Backlight] / [Contrast] / [Brightness] /
[Colour] / [Sharpness] / [Tint] (NTSC signal) /
[Bass] ∗ / [Treble] ∗ / [Balance] / [Digital TV Auto
Tuning] / [Analogue TV Auto Tuning]
∗ [Music] or [Speech] mode in the Sound Menu
5
Channel Up / Down, Value change (when using the
F button), Switching the TV on
6
Changes the input mode
7
Mains power On / Off switch
●
Use to switch the mains power.
If you turned the TV off during Standby mode
by the remote control last time, the TV will be
in Standby mode when you turn the TV on with
Mains power On / Off switch.
8
Front Logo LED
●
To turn the LED on / off, set [Front Logo LED] in
Setup Menu.
●
When pressing the control panel button (4 - 7), the
control panel guide appears on the right side of the
screen for 3 seconds to highlight the pressed button.
Rear side of the TV
(p. 49)
4
5
6
7