Audio Output Settings - Panasonic Viera TH-L47DT50A Operating Instructions Manual

● To jump to the specified time point
While the time seek bar is displayed
●
To change aspect
● To confirm or change the current status (if available)
"Display the selectable settings for the current status" (p. 23)
■
Chapter List
(USB HDD only)
You can start playback from the chapter list you select.
●
The chapter list is not displayed while the selected content is being recorded.
To play back from the chapter list
Note
● Depending on the recorded programmes, some playback operations may not work properly.
■
To change the device
You can change to the other device directly in the same mode if two or more devices are connected.
1 2
Display the Select [Drive Select]
option menu
Option Menu
Create Group
Release Group
Drive Select
Contents Select
Change Protect Status

Audio output Settings

You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
●
To confirm or change the current sound status
1
Display the menu and Select [Sound]
Menu Item
SPDIF Selection
76
/
Press: Search about 10 seconds
Press and hold: Search rapidly
●
To display the subtitle (if available)
/
Chapter List
00:00:00 00:05:00
select
access
(p. 74)
Sound
select
access
Adjustments / Configurations (alternatives)
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. DTS is output as DTS.
MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
3
Select the device to access
Drive Select
EXIT
Select
RETURN
SD Card USB HDD1
Access
USB HDD1
If you select the device to play back photos, videos or music,
change to the appropriate content.
●
To change the content
select [Contents Select]
access
2
Select [SPDIF Selection] and set
SPDIF Selection Auto
Reset Sound Defaults Reset
select
access / store
select
playback
select
access
USB Flash...
2/2