Fujitsu PRIMEQUEST 2000 Series Installation Manual page 74

CHAPTER 3 Work before Operating System Installation
3.5 Partition Configuration (Extended Partitioning)
Remark
- Clicking the [+/-] Button in [Memory] – [DIMM] cell can be increased or decreased the number of specified memory
capacity in one DIMM module unit.
- If the check box in [Memory] – [EXCL] cell of the Extended Partition is checked, all the physical DIMMs (DIMM
modules) that used by the Extended Partition are not used other partition.
- If the check box in [Memory] – [EXCL] cell of the Extended Partition is checked, all the physical DIMMs assigned to
the Extended Partition is not used by other partitions.
5. Enable the socket binding function
Socket binding is the function to be assigned the CPU / DIMM resources of the Extended Partition to 2CPU of the
physical partition and the DIMMs belonging to the CPU. For example, it can use it for the purpose to guarantee two
or less the CPU socket number of the Extended Partition in the case that is billed software license in proportion to the
number of CPU sockets.
Check the check box of [SKT Binding] field of the Extended Partition and dick the [Apply] button.
Then socket binding is enabled.
If number of CPU sockets in physical partition is 2 or less,
Remark
If socket binding function is enabled, the assigning rule of the CPU core and the DIMM is below.
- In the case that the number specified in [CORE] is smaller than the total number of core within 2CPU, cores of a
specified number of [CORE] will be assigned to the Extended Partition.
- In the case that the number specified in [CORE] is greater than the total number of core within 2CPU, all cores
within 2CPU will be assigned to the Extended Partition.
- In the case that the capacity specified in [GB] is smaller than the total capacity of the DIMM which belonging to
2CPU, DIMM capacity specified in [GB] will be assigned to the Extended Partition.
- In the case that the capacity specified [GB] is greater than the total capacity of the DIMM belonging to 2CPU, all
DIMMs belonging to 2CPU will be assigned to the Extended Partition.
6. Assign VGA/USB/PCI Slot resources to Extended Partition.
Select [USB1], [VGA/USB2/rKVMS] and [PCI Slot] and click [Apply] button.
Remark
- Video Redirection and virtual media can be used by the Extended Partition where selected [VGA/USB2/rKVMS].
If VGA/USB2/rKVMS is assigned to other partition the following step are required.
a. Power off the Extended Partition which is assigned VGA/USB2/rKVMS.
b. Remove VGA/USB2/rKVMS of the Extended Partition and assign VGA/USB2/rKVMS to the Extended Partition
which uses Video Redirection and virtual media.
socket binding is not required.
51
CA92344-0536-01