Standby Power Save
Set
Standby Power Save
The power consumption of the connected equipment in Standby mode is
controlled higher or lower in synchronisation with the TV on / off state to
reduce the consumption.
When the TV is set to Standby mode, the connected equipment is
automatically set to Standby and the power consumption of the connected
equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode,
but the power consumption is increased to start the connected equipment
fast.
This function is effective if the connected equipment can change the power
●
consumption in Standby mode and is set to higher consumption.
This function works when
●
Intelligent Auto Standby
Set
Intelligent Auto Standby
When the TV is on, non-used connected equipment goes into Standby mode
automatically to reduce the power consumption. For example, when the input
mode is switched from HDMI or when
(except for watching a disc).
This function may not work properly depending on the connected
●
equipment. In this case, set to Off.
to
On
in
VIERA Link Settings
Power off Link
is set to On.
to
On
in
VIERA Link Settings
Speaker Selection
- 207 -
to use this function.
to use this function.
is changed to
TV