Preparations
Connect the equipment supporting VIERA Link.
●
For VIERA Link connections
●
Functions > VIERA Link "HDAVI Control™" > Summary of VIERA Link
Use a fully wired HDMI compliant cable.
●
Use a fully wired SCART cable.
●
Set up the connected equipment. Read the manual of the equipment.
●
Set
VIERA Link
to
●
Set up the TV. After connection, turn the equipment on and then switch the
●
TV on. Select the HDMI input from
that an image is displayed correctly. (This setup should be done each time
the following conditions occur.)
– First time operation
– Adding or reconnecting equipment
– Changing setup
Easy playback
Automatic input switching - When the connected equipment is operating, the
input mode is switched automatically.
Power on Link
Set
Power on Link
to
When the connected equipment starts playback or direct navigator / function
menu for the equipment is activated, the TV is automatically turned on. (Only
when the TV is in Standby mode.)
Power off Link
Set
Power off Link
to
When the TV is set to Standby mode, the connected equipment is also
automatically set to Standby.
This function will work even if the TV enters Standby mode automatically
●
by auto power standby function.
On
in the Setup Menu.
Input Selection
On
in
VIERA Link Settings
On
in
VIERA Link Settings
- 206 -
with
AV
and make sure
to use this function.
to use this function.