Replacing The Display Bezel - Dell Precision M6400 Service Manual

LED and CCFL Displays: Dell Precision M6400 Service Manual
1 left side of bezel
3 right side of bezel 4 M2.5 x 5-mm screws (2)
5 display assembly

Replacing the Display Bezel

CAUTION: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
1. Angle the bottom of the bezel in under the hinges, then firmly press the center of the bottom of the bezel into place.
2. Push in on the left and right sides of the bezel and ensure the tabs connect inside the display cover.
3. Firmly press along the top to snap the bezel into place.
4. Replace the two M2.5 x 5-mm screws on the bottom of the bezel.
file:///T|/htdocs/systems/wsm6400/en/sm/displayb.htm[11/16/2012 10:27:02 AM]
2 top of bezel
6 bottom of bezel