BMW 1999-2005 M3 Service Manual page 348

Fuel Injection
11 of 19
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/1...
upwards out of rubber retainer (A) and
unhook ball end of cable (B) from
throttle actuator.
Remove nuts and bolt (arrows)
retaining wiring harness conduit to
throttle body.
Working at throttle housing: Turn
harness plug (arrow) counterclockwise
and remove.
Working at side of intake manifold,
disconnect electrical harness
connectors:
Idle control valve (A)
Intake manifold resonance valve
(B)
2/25/2009 9:55 PM