Front Suspension
1 of 2
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/3...
Stabilizer Bar
Stabilizer bar, removing and
installing
On E46 models the stabilizer bar links
attach to the strut assemblies.
Raise car and support safely.
-
WARNING!
Make sure that the car is firmly
supported on jack stands designed
for the purpose. Place the jack
stands beneath a structural chassis
point. Do not place jack stands
under suspension parts.
Remove stabilizer bar connecting link
mounting nut (arrow) from stabilizer
bar on right side. Counterhold ball joint
with flat wrench. (Rear wheel drive
model shown.)
Repeat on left side.
-
Remove stabilizer bar bushing anchor
nuts (arrows) on right side.
-
Repeat on left side.
Remove bar.
-
310-5
2/25/2009 10:26 PM