Assembly - Central Machinery 67414 Set Up, Operating, And Servicing Instructions

asseMblY

read the entire iMportant
saFetY inForMation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
FroM accidental
startinG:
turn off the engine, wait for
the engine to cool, and
disconnect the spark plug
wire(s) before assembling or
making any adjustments to
the equipment.
operate only with proper
spark arrestor installed.
operation of this equipment
may create sparks that
can start fires around dry
vegetation.
a spark arrestor may be
required.
the operator should contact
local fire agencies for laws
or regulations relating to fire
prevention requirements.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
SKU 67414 For technical questions, please call 1-800-444-3353.
to prevent
serious injurY
to prevent
serious injurY:
R-Pin
(35a)
Auger
(33a)
Figure 1
1. Insert the shank of the Auger (33a)
fully upward into the Transmission
Socket (15a).
2. Secure the Auger in the Transmission
Socket, using the Pin (34a) and R-Pin
(35a).
Pin (34a)
Transmission
Socket (15a)
Page 9