Casio QV-7000SX Service Manual & Parts List page 40

(4) Check program Ver.
Insert CF card that comes with the unit. Then turn power on pressing DISP button and MENU
button at the same time. Make sure program version is 98100102.
Turn power off then on again and make sure recording and playing functions alright.
LCD display
TEST MODE
WHITE NOISE DATA YES
LOADER
ADJ. 98000829
VER. 98082901
(5) Erroneous correction check
Insert the CF card that comes with the unit. Turn power on, then tap the right side of the unit with
a finger. Make sure the unit does not turn off.
Trouble2 : Power does not turn on.
cause1. Shortcircuit.
action1. Replace fuse.
cause2. CF cover is open.
Detect switch is broken.
action2. Close memory card cover.
Replace detect switch.
cause3. No flat cable or broken flat cable between D PCB ass'y and L PCB ass'y.
action3. Replace or install flat cable.
cause4. No flat cable or broken flat cable between D PCB ass'y and switch unit.
action4. Replace or install flat cable.
Trouble3 : Video screen failure. LCD display is OK.
cause1. Setting of NTSC/PAL is incorrect.
action1. Set the video output appropriate for the TV.
After replacing D PCB ass'y always check the setting.
Trouble4 : No flash
cause1. Bad connection between D PCB ass'y and camera unit.
action1. Reconnect connectors.
cause2. Flash unit failure.
action2. Replace flash unit.
2
Program version
— 38 —