3. Upper case
1. Unscrew three screws (S5) on L PCB ass'y.
Remove CN920 and CN700.
screw(S5)
CN920
2. Upper case and L PCB ass'y separated.
3. Remove cushion.
4. Unscrew two screw (S1) in the tripod screw.
screw(S5)
CN700
screw(S5)
screw(S1)
5. Unscrew four screws (S5) on BL ass'y.
screw(S5)
6. Upper case, TFT-LCD module, BL ass'y
separated.
7. Remove DP panel from upper case by pushing.
8. DP panel, sheet switch ass'y, upper case
separated.
— 23 —
screw(S5)