Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit
Press and hold both the SEL (select) and
time for several seconds.
This will reset the built-in microcomputer.
Your preset adjustments - such as preset channels or
sound adjustments - will also be erased.
How to use the number buttons:
If you press MODE, the unit goes into functions mode and the number buttons work as different
function buttons.
MODE
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds
without pressing any number button until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
BEFORE USE
* For safety....
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
2
2
2
3
3
4
5
5
6
6
Playing CDs .............................................
7
8
9
9
12
(standby/on/attenuator) buttons at the same
(standby/on/attenuator)
SEL (select)
7
8
MO
KS-FX711
7
8
MO
KS-FX511
* Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
9
10
11
12
RPT
RND
9
10
11
RPT
12
RND
15
17
19