Canceling Advanced SCM
—SCM LINK
You can cancel the Advanced SCM (Sound
Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source
so that you can change the sound modes simply
by changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources.)
• LINK OFF: Conventional SCM (one sound
mode for all sources.)
1
Press and hold SEL (select) for
more than 2 seconds.
"CLOCK H," "CLOCK M," "SCM LINK,"
"LEVEL," "B. SKIP" or "EXT IN*" appears on
the display.
S E L
2
Select "SCM LINK" if not shown on
the display.
¢
4
3
Select the desired mode—"LINK ON"
or "LINK OFF."
16
* Displayed only when one of
the following sources is
selected — FM, AM and
Tape.
CLOCK H
CLOCK M
EXT IN
SCM LINK
B. SKIP
LEVEL
LINK ON
LINK OFF
4
Finish the setting.
S E L
Selecting the level display
—LEVEL
You can select the level display according to your
preference.
When shipped from the factory, "AUDIO2" is
selected.
• AUDIO1:
Level meter illuminates.
• AUDIO2:
Alternates level meter and
illumination display.
• OFF:
Erases the audio level indicator.
1
Press and hold SEL (select) for more
than 2 seconds.
"CLOCK H," "CLOCK M," "SCM LINK,"
"LEVEL," "B. SKIP" or "EXT IN*" appears on
the display.
* Displayed only when one of
the following sources is
S E L
selected — FM, AM and
Tape.
2
Select "LEVEL" if not shown on the
display.
CLOCK H
¢
4
EXT IN
B. SKIP
CLOCK M
SCM LINK
LEVEL