How To Reset Your Unit; How To Use The Number Buttons - JVC GET0067-001A Instructions Manual

How to reset your unit

Press and hold both the SEL (Select) and
(Standby/On/Attenuator) buttons at the same time for
several seconds.
This will reset the built-in microcomputer.
NOTES:
Your preset adjustments — such as preset channels or sound
adjustments — will also be erased.
If a CD is in the unit, it will eject when you reset the unit.
Pay attention not to drop the CD.

How to use the number buttons:

If you press MODE, the unit goes into functions mode and the number buttons work as different
function buttons.
MODE
8
7 MO 9
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds without
pressing any number button until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
2
10 12
11
RPT RND
(Standby/On/Attenuator)
SEL (Select)
Time countdown indicator