Picture Effect; Capturing A Basic White Color In [Custom Setup] Mode - Sony DSC-WX220 Instructions For Use Manual

Uses the white balance setting saved in [Custom Setup].
Custom Setup:
Memorizes the basic white color under the light conditions for the shooting environment.
Note
[White Balance] is fixed to [Auto] in the following situations:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
[46] How to Use

Capturing a basic white color in [Custom Setup] mode

In a scene where the ambient light consists of multiple types of light sources, it is
recommended to use the custom white balance in order to accurately reproduce the
whiteness.
1. MENU →
2. Hold the product so that the white area fully covers the AF area located in the center,
and then press
The calibrated values (Color Temperature and Color Filter) are displayed and
registered.
Note
The message [Custom WB Error] indicates that the value is higher than the expected
range, when the flash is used on a subject with too bright colors in the frame. If you
register this value, the
You can shoot at this point, but it is recommended that you set the white balance again to
get a more accurate white balance value.
[47] How to Use

Picture Effect

Select the desired effect filter to achieve more impressive and artistic images.
Using shooting functions
(Camera Settings) → [White Balance] → [Custom Setup].
on the center of the control wheel.
indicator turns yellow on the recording information display.
Using shooting functions
Adjusting color tones
Selecting an effect mode