Capturing A Basic White Color In [Custom Setup] Mode; Picture Effect - Sony DSC-WX350 Manual

Capturing a basic white color in [Custom Setup] mode

In a scene where the ambient light consists of multiple types of light sources, it is
recommended to use the custom white balance in order to accurately reproduce the
whiteness.
1. MENU →
2. Hold the product so that the white area fully covers the AF area located in the center,
and then press
The calibrated values (Color Temperature and Color Filter) are displayed and
registered.
Note
The message [Custom WB Error] indicates that the value is higher than the expected
range, when the flash is used on a subject with too bright colors in the frame. If you
register this value, the
You can shoot at this point, but it is recommended that you set the white balance again to
get a more accurate white balance value.
[47] How to Use

Picture Effect

Select the desired effect filter to achieve more impressive and artistic images.
1. MENU →
Menu item details
Off (default setting):
Disables the [Picture Effect] function.
Toy Camera:
Creates a soft image with shaded corners and reduced sharpness.
Pop Color:
Creates a vivid look by emphasizing color tones.
Posterization:
Creates a high contrast, abstract look by heavily emphasizing primary colors, or in black and
(Camera Settings) → [White Balance] → [Custom Setup].
on the center of the control wheel.
indicator turns yellow on the recording information display.
Using shooting functions
(Camera Settings) → [Picture Effect] → desired setting.
Selecting an effect mode