Fujitsu Siemens Computers Primergy RX330 S1 Operating Manual page 51

Starting up and operation
Drive access indicator (green)
Flashes green when an internal hard disk drive is being
accessed.
Global Error indicator (red)
!
Does not light up when the system is OK. No service incident or
critical event has occurred.
Lights up red when a predictable error has been detected. Users
can check the system and event log or via ServerView for more
detailed information.
Flashes red when a critical event has occurred. Users can check
for event details in the BIOS Setup, the system and event log or
via ServerView.
If the event is still acute after a power failure, the indicator is
activated after the restart.
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
The ID indicator can also be activated via ServerView and its status
reported to ServerView.
Indicators on the drives
CD/DVD indicator
Lights up green when the storage medium is being accessed.
RX330 S1
Operating manual
Controls and displays
51