Fujitsu Siemens Computers Primergy RX330 S1 Operating Manual page 46

Connecting devices to the server
Figure 9: USB port on the front
Connecting the keyboard, mouse and monitor
Ê Connect the monitor, keyboard and mouse to the standard ports of the
server (see table and
I
If a separate graphics card is installed in a slot, the graphic controller on
the system board is automatically deactivated. The corresponding
monitor port (VGA) can not be used. Plug the data cable of the monitor
into the monitor port of the graphics card.
Ê Connect the power cable of the monitor to the mains socket strip of the rack.
I
The rated current for the monitor can be found on the technical data label
on the monitor or in the operating manual for the monitor.
46
1
figure 8 on page 45).
Operating manual
Hardware installation
RX330 S1