Table of Contents
Advertisement
If you don't have the original
carton, you may obtain a product
service foam-in-place shipping
pack from the Crown Factory
Service at the number listed
below. For non-warranty service,
you may also provide your own
shipping pack, however we
still recommend using a Crown
Supplied Shipping Container.
Minimum recommended require-
ments for materials are as follows:
275 P.S.I. burst test Double-Wall
carton that allows for 2-inch solid
Styrofoam on all six sides of unit
or 3 inches of plastic bubble
wrap on all six sides of unit;
Page 28
Crown Factory Service
1718 W. Mishawaka Rd.,
Elkhart, Indiana 46517 U.S.A.
Telephone: 574-294-8200
800-342-6939 (North America,
Puerto Rico, and Virgin Islands only)
Facsimile:
574-294-8301 (Technical Support)
574-294-8124 (Factory Service)
Internet:
http://www.crownaudio.com
securely seal the package with
an adequate carton sealing
tape. Do not use light boxes or
"peanuts." Damage caused by
poor packing cannot be covered
under warranty.
4. Do not ship the unit in any kind of
cabinet (wood or metal). Ignor-
ing this warning may result in
extensive damage to the unit and
the cabinet. Accessories are not
needed-do not send the product
documentation, cables and other
hardware.
If you have any questions, please
contact Crown Factory Service.
SST Modules
Reference Manual
Advertisement
Table of Contents
