Operation - Poulan Pro 330 Instruction Manual

KNOW YOUR SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Bar Tool
Front Hand Guard
Chain
Adjusting
Screw
Cylinder Cover
Fast Idle
Throttle
Lock
Lockout
Rear
Handle
Throttle
Trigger
Chain Brake
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop the
engine.
THROTTLE TRIGGER
The THROTTLE TRIGGER controls engine
speed.
THROTTLE LOCK- -OUT
The THROTTLE LOCK- -OUT must be
pressed before you can squeeze the throttle
trigger. This feature prevents you from acci-
dentally squeezing the trigger.
FAST IDLE LOCK
The FAST IDLE LOCK holds the throttle trig-
ger in the starting position. Activate the fast
idle lock by pressing the throttle lock- -out and
squeezing the throttle trigger.
throttle trigger squeezed, press the fast idle
lock. Release the throttle lock- -out and trig-
ger while holding the fast idle lock button.

OPERATION

Front Handle
Bar Oil
Starter Housing
Fill Cap
Guide Bar
Chain Brake Nuts
CHOKE KNOB
The CHOKE KNOB activates the choke to
provide additional fuel to the engine during
cold starting.
CHAIN BRAKE
The CHAIN BRAKE is a device designed to
stop the chain if kickback occurs. The chain
brake activates automatically in the event of
kickback. The chain brake activates manu-
ally if the front hand guard is pushed forward.
The chain brake is disengaged by pulling the
front hand guard back toward the front han-
dle as far as possible.
CHAIN TENSION
It is normal for a new chain to stretch during first
30 minutes of operation. You should check
WIth the
your chain tension frequently. See CHAIN
TENSION under the ASSEMBLY section.
WARNING:
and after use. Do not touch the muffler or al-
low combustible material such as dry grass
or fuel to do so.
8
Starter Rope
Choke Knob
ON/STOP
Switch
Fuel Mix Fill Cap
Direction
of Chain
Travel
Muffler is very hot during