Water plus system
This is used to select the water intake
setting for the Water plus button.
There are three different options:
Setting 1 (the machine is delivered with
this option selected)
The water intake is increased in the
wash and rinse stages.
Setting 2:
An extra rinse is carried out.
Setting 3:
The water intake is increased in the
wash and rinse stages and an extra
rinse is carried out.
Follow steps A to F to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is properly closed.
Programmable functions
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
C Wait until the indicator light for the
Start/Stop button comes on . . .
D . . . and then release the Start/Stop
button.
– The Buzzer indicator light will flash
on and off once.
– A P will flash in the display
alternating with the number 1, 2 or 3.
E Each subsequent press of the Start/
Stop button will select a different
setting.
The number alternating with the P in the
display refers to the settings as follows:
1 = Setting 1 is selected
2 = Setting 2 is selected
3 = Setting 3 is selected
F Switch the washing machine off with
I-On/0-Off button.
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
59