Changing the programme sequence
System lock
The system lock prevents your
machine being used without your
knowledge.
If the system lock has been activated it
is not possible to start a programme.
To activate the system lock
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed
A Press the Water plus and
Temperature buttons at the same
time and hold them pressed in until
you reach step D.
B Switch the machine on with the I-On/
0-Off button.
C Press the Degree of soiling light/
normal/heavy button three times.
D Then release the Water Plus and
Temperature buttons.
The Locked check light will flash.
E Switch off the washing machine.
To deactivate the system lock
Repeat steps A to D. The Locked
check light will go out.
28