Table of Contents
Advertisement
The programmable functions are used
to alter the washing machine's elec-
tronics to suit changing requirements.
Programmable functions can be
altered at any time.
Opening the programming level
Programming is carried out in 8 steps
(, , ... ) using the sensor con-
trols.
Prerequisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
Touch the Start/Add laundry sensor
control and hold it down while carry-
ing out steps –.
Close the washing machine door.
Wait until the Start/Add laundry sensor
control lights up constantly ...
... and then release the Start/Add
laundry sensor control.
After approximately 4 seconds, will
light up on the time display.
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear in the time display
as and a number: e.g. .
Touch the or sensor control to
scroll to the next or previous pro-
grammable function:
Programmable functions
Programmable functions
Buzzer
Keypad tone
PIN code
Control field switch-off behaviour
Memory
Additional long pre-wash – Cottons
Gentle action
Reduced temperature
Water plus
Water plus level
Maximum rinse level
Suds cooling
Anti-crease
Low water pressure
Display brightness dimmed
Remote control
SmartGrid
RemoteUpdate
Confirm the selected programmable
function by touching the Start/Add
laundry sensor control.
77
Advertisement
Table of Contents
